Front Carrier Block

The front bag are really practical add-on for all Brompton, very useful when you want to carry things around while cycling.

Brompton B75 doesn’t come with a front carrier block so before I can get a bag, I will need to fix a carrier block first. The other range of Brompton should come with a black plastic front carrier block which works for all the Brompton front bag and most of the after market bags but if you want to get something matching, there are variety of colours for you to choose from.

Don’t under estimate this little piece of block, some could cost up to $80 SGD ! Check out this H&H front carrier block . The block weigh average 70~80g and the design are all identical, furthermore it’s not visible after attaching a bag. Therefore I don’t really think it’s worth to spend too much money on it. I think as long as it’s compatible to most of the bags, any block will serve the purpose. So after some research, I found one at only $20 SGD on Shopee. It’s by this brand Muqzi which come in 5 different colour, weigh about 68g and took only 5 days to arrive.

Installation is very straight forward, it will take probably about 5-10 mins.

First remove the original screws, if the bicycle doesn’t come with it, it’s totally fine. The front block carrier should come with 2 compatible screws.

Installation is easy, it will take probably about 5-10 mins.

First remove the original screws, if the bicycle doesn’t come with it, it’s totally fine. The front block carrier should come with 2 compatible screws.

Next screw the base into the nose, follow by the plate onto the base.

That’s it, easy and cheap add-on.

Leave a Reply

Your email address will not be published.